mike5721947
2.08.08, 2:24 pm
ok, my girlfriends younger brothers manged to bend up the a/v plug in on their xbox (bought used, old overheating 2005 model) it ran great up till then. parents went and just bought them a new one as they though it was toast as its almost used 24/7.
its pretty beat up for the prongs on the lower side of the female plug on the motherboard and am wondering if
A) someone makes that plug that i can just unsolder and resolder a new one on.
B) figure out what prongs must be used for basic RCA hookup (its hooking up though my computer though RCA. (could also do S video...) and fix them up enough to make it all work.
C) rip the plug off and solder the proper wires directly on. (is it just a simple 3 wire hookup or is it more complicated?
its pretty beat up for the prongs on the lower side of the female plug on the motherboard and am wondering if
A) someone makes that plug that i can just unsolder and resolder a new one on.
B) figure out what prongs must be used for basic RCA hookup (its hooking up though my computer though RCA. (could also do S video...) and fix them up enough to make it all work.
C) rip the plug off and solder the proper wires directly on. (is it just a simple 3 wire hookup or is it more complicated?